The atomizer comes in two colors, black and stainless steel, and the one I received is stainless steel. After taking out the atomizer, the bottom is a description with the official website and a list of accessories, and the edge is the official website QR code and anti-counterfeiting barcode
There are 4 spare screws in the accessory kit, 2 base silicone rings, 1 top silicone ring, 2 drip nozzle transparent silicone rings, and 1 hexagon screwdriver.
Adjustable gold-plated electrode at the bottom, suitable for various poles and boxes. Indicate the manufacturer name and model, etc.
Double column 4-hole electrode column, the distance between the two columns is 6MM, using 2 on 2 sides of hexagonal screws, huge heating wire aperture, allowing players to play with different heating wires. The bottom adopts a double-layer silicone ring to effectively prevent air leakage and oil leakage (the double column of the atomizer I received has a tilt phenomenon, and adjustment of the bottom electrode can not be corrected, but it does not affect the use)
There are 3 air inlets at the bottom of the outer compartment, which can adjust the amount of air in accordance with the sloped air inlet groove of the base. The upper cover is hollowed out. One is to effectively reduce the heat when the atomizer evaporates and burn the mouth, and the other is to facilitate nails. Open the upper cover of the card main hollow position. The drip nozzles all use a funnel type to effectively collect smoke and reflux condensate.
This time we used the popular 0.4 Kangsi-3.0 circle diameter-7 circle-double engine-35.5W push, the base oil tank is also a highlight, it is deep enough to increase the oil storage capacity, and rationally use the amount of cotton It’s full of drops.
I took 4 droppers and removed the hatch. There was obviously condensation at the air inlet. This is an unavoidable drawback. I can only rely on my diligent hands to wipe and wipe with a tissue. But this place is the biggest bright spot, that is, when the air is in, the airflow gathers in the middle of the heating wire, and the concentrated smoke flows back into your mouth. At this moment, the mouth is so warm…
What you need to pay attention to when refueling is to avoid refueling on both sides of the air hole, otherwise the smoke oil will flow out with the sloped air inlet (unless you have a special preference to touch the oil, it doesn’t matter, just touch it when it comes out. Touch it)
Advantages: easy to make silk, a lot of cotton can be stored in the oil tank of the base, the whole is polished smoothly without cutting hands, the biggest highlight is the oblique air inlet, after the smoke is gathered, the taste of the smoke is greatly improved, and it is indeed a dripping taste!
Disadvantages: I spent 24 hours trying to find faults, except for the inevitable oblique air inlet condensate that needs to be wiped frequently. The only regret is that the accessory hexagonal screwdriver is soft and thin, and the thick hand is not easy to pinch. It is recommended that the manufacturer can change to the case of the prototype at both ends of the screwdriver and thicken the middle hand pinch part.
1.www.vapeciga.com, 50% discount for purchases on vapeciga.com
2.SMART NaNo 60W Vape review